Disclaimer: CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON. THIS CONTENT IS PROVIDED "AS IS" AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.
While we strive to provide accurate and up-to-date information, the rapidly evolving nature of battery technology means that information may become outdated or inaccurate over time. It is essential to independently verify any information presented on findyourbatteries.com. It is not intended to be a substitute for professional advice on battery power, energy or electrical systems, or related areas.
SigmasTek SP6-9HR Battery Specs
The SigmasTek SP6-9HR is a 6V 9Ah SLA AGM Battery with F2 Terminals.
- Type: Rechargeable Sealed Lead Acid (SLA), Absorbent Glass Mat (AGM)
- Voltage / Capacity: 6V 9Ah
- Length: 151 mm (5.95″)
- Width: 34 mm (1.34″)
- Height: 94 mm (3.7″)
- Height with Terminal: 100 mm (3.94″)
- Terminal Type: F2 – 6.35 mm wide (1/4″)
Battery Model: SigmasTek SP6-9HR
The SigmasTek SP6-9HR battery is a 6V 9Ah rechargeable sealed lead acid (SLA) battery from the SigmasTek HR Series with an absorbent glass mat (AGM) design.
Designed with a safety vent that releases gas to prevent excessive internal pressure buildup, SLA batteries offer many benefits as they are low maintenance, leakproof / spillproof, reliable, and position insensitive (they can operate in any orientation).
The SigmasTek HR Series are multi-functional for both cycle and standby use, and they have a life expectancy of 3-5 years in standby use.
Batteries from the HR Series are also capable of providing long cycle life performance and are designed specifically for high-rate UPS discharge applications where higher power output is required over a short period of time.
The SigmasTek SP6-9HR battery typically comes with the F2 Type Terminal but you may want to confirm that before purchasing. If you need a different terminal type than what’s available, adapters may be an option.
If you need batteries for your business, Amazon Business offers features and options that might interest you. Learn more!
How can I extend the life of my SigmasTek HR Series sealed lead acid battery while it is in storage?
In general, it is not recommended to leave sealed lead acid batteries in storage while in a discharged or partially charged state. Sealed lead acid batteries self-discharge about 3% every month and if they are not recharged periodically, you may not be able to recover its fully capacity.
To help extend the life of your SigmasTek HR Series battery, store your battery in a cool and dry place at 25°C (77°F).
A freshening charge for your SigmasTek HR Series battery is recommended at six months if stored at 25°C (77°F). For higher temperatures, the time interval will be shorter.
What does it mean if my SigmasTek battery is swollen?
Immediately remove and discontinue use of any sealed lead acid battery if it is bulging or bloated as it means it has become damaged.
Sealed lead acid batteries can become damaged and swollen if they are overcharged or short-circuited. This can happen if the battery charger is providing too much current, such as using a 24V charger to charge a 12V battery.
Be sure to take care in properly charging your SigmasTek battery by using a good quality charger that is fully compatible with your battery.
SigmasTek SP6-9HR F2 Battery Replacement Cross-Reference & Compatibility List
The 6V 9Ah SigmasTek SP6-9HR battery with F2 terminals fits and replaces the following and more:
Battery Chart for SigmasTek SP6-9HR F2 Terminal
|Brand / Manufacturer
|Battery Model No.
|Common Replacement For
|Sealed Lead Acid / AGM
|Nominal Capacity (20HR)
|F2, No. 250 (0.25″ / 6.35 mm wide)
|5.95″ (151 mm)
|1.34″ (34 mm)
|3.7″ (94 mm)
|Total Height with Terminal
|3.94″ (100 mm)
|3.09 lbs (1.4 kg)