Disclaimer: CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON. THIS CONTENT IS PROVIDED "AS IS" AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.
While we strive to provide accurate and up-to-date information, the rapidly evolving nature of battery technology means that information may become outdated or inaccurate over time. It is essential to independently verify any information presented on findyourbatteries.com. It is not intended to be a substitute for professional advice on battery power, energy or electrical systems, or related areas.
PetSafe PIF00-14288 Collar
The PetSafe PIF00-14288 Receiver Collar is a compatible dog collar replacement for the PetSafe Stay+Play Wireless Fence System.
- Type: Rechargeable Dog Collar
- For: PetSafe Stay+Play Wireless Fence Systems
What kind of battery or charger do I need for my PetSafe Stay+Play Wireless Fence Rechargeable Receiver Collar?
The PetSafe Stay+Play Wireless Fence Rechargeable Receiver Collar uses a built-in, non-replaceable rechargeable battery. The battery charger for the collar is typically included with your purchase of the product.
Since there is no way to remove and replace the battery from the unit, if your battery is no longer operating, you will need to replace the entire collar.
If you need batteries for your business, Amazon Business offers features and options that might interest you. Learn more!
How do I know if the battery in my PetSafe Stay+Play Wireless Fence Rechargeable Receiver Collar is still working?
You can test the battery operation in the Stay+Play Wireless Fence Rechargeable Receiver Collar by removing the collar from your pet and walking into the boundary zone you have set up with the Receiver Collar in your possession. The Receiver Collar should emit a tone or stimulation (depending on the settings you selected when setting up your PetSafe Fence/Containment System). If it does not, it could be a sign that the collar needs to be replaced.
How do I know when to charge the battery in my PetSafe Stay+Play Wireless Fence Rechargeable Receiver Collar?
Depending on how often your pet tests the boundaries and how frequently the warnings are emitted, each charge can last up to 3 weeks, but it is important to check the battery regularly to ensure that your system works properly.
There is a Receiver LED Indicator Light that slowly blinks red every 4 seconds when the battery is low, indicating that it needs to be charged.
The PetSafe Stay+Play Wireless Fence Rechargeable Receiver Collar takes about 2-3 hours to fully charge.
Note that you should not charge your Stay+Play Wireless Fence Rechargeable Receiver Collar every night as the frequent charging can have a negative effect on the battery life and performance. It is recommended that you use the Stay+Play Wireless Fence Rechargeable Receiver Collar until the LED Indicator Light begins blinking yellow or red.
See the operating battery status table below.
PetSafe Stay+Play Wireless Fence Rechargeable Receiver Collar Operating Battery Status
|Collar Battery Charge
|Slow Blinking Green,
every 4-5 seconds
|Slow Blinking Yellow,
every 4-5 seconds
|Slow Blinking Red,
every 4-5 seconds
|20% or less,
How do I charge the battery in my PetSafe Stay+Play Wireless Fence Rechargeable Receiver Collar?
It is important that you do not attempt to charge the battery in your PetSafe Stay+Play Wireless Fence Rechargeable Receiver Collar while your pet is still wearing it, so be sure to remove the collar from your pet before charging the battery.
To charge the battery in your Stay+Play Wireless Fence Rechargeable Receiver Collar, lift and slide the Receiver Collar strap away from the front of the unit, then remove the rubber plug to gain access to the Receiver Charge Jack, leaving the rubber plug attached to the Receiver Collar. Next, plug the Receiver Collar Charger into the Receiver Charge Jack on the Receiver Collar to charge the battery.
You will know that the Receiver Charger and the Receiver Charge Jack are properly connected and that the charge is in progress when the Receiver LED Indicator Light turns solid red.
A built-in safety circuit prevents the Receiver Collar from overcharging. You will know that the collar is fully charged when the Receiver LED Indicator Light turns solid green.
Note that the Receiver Charge Jack and Receiver Collar Charger are designed to only fit one way. Do not force the plug in backwards.
If you do not see a light even though you believe the Charger and Charge Jack are properly connected, it may indicate a charge failure and you should contact the manufacturer.
Full instructions on how to charge the battery in your PetSafe Stay+Play Wireless Fence Rechargeable Receiver Collar along with accompanying images and status indicator tables are available in the operating guide from PetSafe.